qemu.git/.git
5 years agoAdded CONFIGURE v2.5.0-412extensions
cmsc412 [Wed, 24 Aug 2016 19:59:09 +0000 (15:59 -0400)]
Added CONFIGURE

5 years agoSpring 2015 Changes to bring 2.5 up to 412 patches.
cmsc412 [Wed, 24 Aug 2016 00:06:17 +0000 (20:06 -0400)]
Spring 2015 Changes to bring 2.5 up to 412 patches.

5 years agoUpdate version for v2.5.0 release v2.5.0
Peter Maydell [Wed, 16 Dec 2015 16:10:14 +0000 (16:10 +0000)]
Update version for v2.5.0 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoUpdate version for v2.5.0-rc4 release v2.5.0-rc4
Peter Maydell [Fri, 11 Dec 2015 16:37:55 +0000 (16:37 +0000)]
Update version for v2.5.0-rc4 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoblockdev: Mark {insert, remove}-medium experimental
Max Reitz [Fri, 11 Dec 2015 15:23:05 +0000 (16:23 +0100)]
blockdev: Mark {insert, remove}-medium experimental

While in the long term we want throttling to be its own block filter
BDS, in the short term we want it to be part of the BB instead of a BDS;
even in the long term we may want legacy throttling to be automatically
tied to the BB.

blockdev-insert-medium and blockdev-remove-medium do not retain
throttling information in the BB (deliberately so). Therefore, using
them means tying this information to a BDS, which would break the model
described above. (The same applies to other flags such as
detect_zeroes.) We probably want to move this information to the BB or
its own filter BDS before blockdev-{insert,remove}-medium can be
considered completely stable.

Therefore, mark these functions experimental for the time being.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1449847385-13986-2-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: fixed format nit (underlining) in qmp-commands.hx]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoFix xbzrle vs last_sent_block update
Dr. David Alan Gilbert [Thu, 10 Dec 2015 16:31:46 +0000 (16:31 +0000)]
Fix xbzrle vs last_sent_block update

My fix (84e7b80a) replaced the last_sent_block update that I'd
removed earlier; however it was too aggressive in the xbzrle case.

save_xbzrle_page might return '0' to mean that the page didn't
need sending since it was the same as the last sent version;
in this case we can't update 'last_sent_block' since we didn't
actually send it.

Symptom: 'Illegal RAM offset 1018000' as we try and send a page
        to the wrong RAMBlock;  potentially that could be a data
        corruption if you were really unlucky.

Fixes: 84e7b80a05c0c44b90533c6cd2f1db5c932ccf77

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 1449765106-6528-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoUpdate language files for QEMU 2.5.0
Peter Maydell [Thu, 10 Dec 2015 13:34:27 +0000 (13:34 +0000)]
Update language files for QEMU 2.5.0

Update translation files (change created via 'make -C po update').

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1449754467-3496-1-git-send-email-peter.maydell@linaro.org

5 years agosparc: allow CASA with ASI 0xa from user space
Alex Zuepke [Fri, 4 Dec 2015 15:01:02 +0000 (16:01 +0100)]
sparc: allow CASA with ASI 0xa from user space

LEON3 allows the CASA instruction to be used from user space
if the ASI is set to 0xa (user data).

Signed-off-by: Alex Zuepke <azu@sysgo.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoMAINTAINERS: add maintainer to virtio-9p
Greg Kurz [Mon, 30 Nov 2015 15:40:16 +0000 (16:40 +0100)]
MAINTAINERS: add maintainer to virtio-9p

As suggested by Paolo, I add myself as maintainer for virtio-9p.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Message-id: 20151130154016.20108.79073.stgit@bahia.huguette.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agovirtio-9p-device: add minimal unrealize handler
Greg Kurz [Tue, 8 Dec 2015 15:54:57 +0000 (16:54 +0100)]
virtio-9p-device: add minimal unrealize handler

Since commit 4652f1640e029e1f2433fa77ba6af285 "virtio-9p: add savevm
handlers", if the user hot-unplugs a quiescent 9p device and live
migrates, the source QEMU crashes before migration completetion...
This happens because virtio-9p devices have a realize handler which
calls virtio_init() and register_savevm().  Both calls store pointers
to the device internals, that get dereferenced during migration even
if the device got unplugged.

This patch simply adds an unrealize handler to perform minimal
cleanup and avoid the crash.  Hot unplug of non-quiescent 9p devices
is still not supported in QEMU, and not supported by linux guests
either.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20151208155457.27775.69441.stgit@bahia.huguette.org
[PMM: rewrapped long lines in commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoUpdate version for v2.5.0-rc3 release v2.5.0-rc3
Peter Maydell [Mon, 7 Dec 2015 17:47:40 +0000 (17:47 +0000)]
Update version for v2.5.0-rc3 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agosd: Mark brittle abuse of blk_attach_dev() FIXME
Markus Armbruster [Mon, 7 Dec 2015 15:55:10 +0000 (16:55 +0100)]
sd: Mark brittle abuse of blk_attach_dev() FIXME

blk_attach_dev() fails here only when we're working for device
"sdhci-pci" (which already attached the backend), and then we don't
want to attach a second time.  If we ever create another failure mode,
we're setting up ourselves to using the same backend from multiple
frontends, which is likely to end in tears.  Can't clean this up this
close to the release, so mark it FIXME.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449503710-3707-3-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agosdhci: Sanitize "sdhci-pci" properties for future qomification
Markus Armbruster [Mon, 7 Dec 2015 15:55:09 +0000 (16:55 +0100)]
sdhci: Sanitize "sdhci-pci" properties for future qomification

We currently fuse controller and card into a single device model, but
we intend qomify things properly and separate the two.  The properties
that really belong to the card would then have to somehow pass-through
to the card's properties.  To avoid that complication, either mark
them experimental or drop them.

Properties "capareg", "maxcurr" and the usual PCI device properties
belong to the controller.  Property "drive" belongs to the card;
rename it to "x-drive".  Properties "logical_block_size",
"physical_block_size", "min_io_size", "opt_io_size",
"discard_granularity" belong to the card, but have no effect; drop
them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449503710-3707-2-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agovirtio-blk: Drop x-data-plane option
Fam Zheng [Mon, 7 Dec 2015 10:59:27 +0000 (18:59 +0800)]
virtio-blk: Drop x-data-plane option

The official way of enabling dataplane is through the "iothread"
property that references an iothread object created by "-object
iothread".  Since the old "x-data-plane=on" way now even crashes, it's
probably easier to just drop it:

$ qemu-system-x86_64 -drive file=null-co://,id=d0,if=none \
    -device virtio-blk-pci,drive=d0,x-data-plane=on

ERROR:/home/fam/work/qemu/qom/object.c:1515:
object_get_canonical_path_component: assertion failed: (obj->parent != NULL)
Aborted

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1449485967-19240-1-git-send-email-famz@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoMerge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
Peter Maydell [Mon, 7 Dec 2015 14:18:31 +0000 (14:18 +0000)]
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Mon 07 Dec 2015 14:06:07 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  lan9118: log and ignore access to invalid registers, rather than aborting
  lan9118: fix emulation of MAC address loaded bit in E2P_CMD register
  vmxnet3: silence warning
  pcnet: fix rx buffer overflow(CVE-2015-7512)
  net: pcnet: add check to validate receive data size(CVE-2015-7504)
  e1000: fix hang of win2k12 shutdown with flood ping

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agolan9118: log and ignore access to invalid registers, rather than aborting
Andrew Baumann [Fri, 4 Dec 2015 18:58:50 +0000 (10:58 -0800)]
lan9118: log and ignore access to invalid registers, rather than aborting

With this change, access to invalid/unimplemented device registers are
logged as a "guest error" rather than aborting qemu with
hw_error. This enables drivers for similar devices (e.g. SMSC 9221),
by simply ignoring the unimplemented writes. It's also closer to what
real hardware does.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
5 years agolan9118: fix emulation of MAC address loaded bit in E2P_CMD register
Andrew Baumann [Fri, 4 Dec 2015 18:58:49 +0000 (10:58 -0800)]
lan9118: fix emulation of MAC address loaded bit in E2P_CMD register

There appears to have been a longstanding typo in the implementation
of the "MAC address loaded" bit in the E2P_CMD (EEPROM command)
register. The code was using 0x10, but the controller spec says it
should be bit 8 (0x100).

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
5 years agovmxnet3: silence warning
Michael S. Tsirkin [Mon, 30 Nov 2015 16:26:24 +0000 (18:26 +0200)]
vmxnet3: silence warning

vmxnet3 always produces a warning under qtest.

This is not a user error, don't warn.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
5 years agopcnet: fix rx buffer overflow(CVE-2015-7512)
Jason Wang [Mon, 30 Nov 2015 07:00:06 +0000 (15:00 +0800)]
pcnet: fix rx buffer overflow(CVE-2015-7512)

Backends could provide a packet whose length is greater than buffer
size. Check for this and truncate the packet to avoid rx buffer
overflow in this case.

Cc: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
5 years agonet: pcnet: add check to validate receive data size(CVE-2015-7504)
Prasad J Pandit [Fri, 20 Nov 2015 06:20:31 +0000 (11:50 +0530)]
net: pcnet: add check to validate receive data size(CVE-2015-7504)

In loopback mode, pcnet_receive routine appends CRC code to the
receive buffer. If the data size given is same as the buffer size,
the appended CRC code overwrites 4 bytes after s->buffer. Added a
check to avoid that.

Reported by: Qinghao Tang <luodalongde@gmail.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
5 years agoe1000: fix hang of win2k12 shutdown with flood ping
Denis V. Lunev [Fri, 27 Nov 2015 06:48:41 +0000 (09:48 +0300)]
e1000: fix hang of win2k12 shutdown with flood ping

e1000 driver in Win2k12 is really well rotten. It 100% hangs on shutdown
of UP VM under flood ping. The guest checks card state and reinjects
itself interrupt in a loop. This is fatal for UP machine.

There is no good way to fix this misbehavior but to kludge it. The
emulation has interrupt throttling register aka ITR which limits
interrupt rate and allows the guest to proceed this phase.
There is no problem with this kludge for Linux guests - it adjust the
value of it itself.

On the other hand according to the initial research in
    commit e9845f0985f088dd01790f4821026df0afba5795
    Author: Vincenzo Maffione <v.maffione@gmail.com>
    Date:   Fri Aug 2 18:30:52 2013 +0200

    e1000: add interrupt mitigation support

    ...

    Interrupt mitigation boosts performance when the guest suffers from
    an high interrupt rate (i.e. receiving short UDP packets at high packet
    rate). For some numerical results see the following link
    http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf

this should also boost performance a bit.

See https://bugzilla.redhat.com/show_bug.cgi?id=874406 for additional
details.

Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Vincenzo Maffione <v.maffione@gmail.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
5 years agoMerge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
Peter Maydell [Fri, 4 Dec 2015 18:11:40 +0000 (18:11 +0000)]
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging

QOM infrastructure fixes and device conversions

* Documentation update
* qom-test and related fixes

# gpg: Signature made Fri 04 Dec 2015 17:54:55 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-peter:
  qom-test: Fix qmp() leaks
  tests: Use proper functions types instead of void (*fn)
  qom: Update documentation comment of struct Object
  tests: Fix check-report-qtest-% target

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoqom-test: Fix qmp() leaks
Marc-André Lureau [Wed, 2 Dec 2015 20:20:34 +0000 (21:20 +0100)]
qom-test: Fix qmp() leaks

Before this patch ASAN reported:
SUMMARY: AddressSanitizer: 677165875 byte(s) leaked in 1272437 allocation(s)

After this patch:
SUMMARY: AddressSanitizer: 465 byte(s) leaked in 32 allocation(s)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1448551895-871-1-git-send-email-marcandre.lureau@redhat.com>
[Straightforwardly rebased onto the previous patch]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
5 years agotests: Use proper functions types instead of void (*fn)
Markus Armbruster [Wed, 2 Dec 2015 20:20:33 +0000 (21:20 +0100)]
tests: Use proper functions types instead of void (*fn)

We have several function parameters declared as void (*fn).  This is
just a stupid way to write void *, and the only purpose writing it
like that could serve is obscuring the sin of bypassing the type
system without need.

The original sin is commit 49ee359: its qtest_add_func() is a wrapper
for g_test_add_func().  Fix the parameter type to match
g_test_add_func()'s.  This uncovers type errors in ide-test.c; fix
them.

Commit 7949c0e faithfully repeated the sin for qtest_add_data_func().
Fix it the same way, along with a harmless type error uncovered in
vhost-user-test.c.

Commit 063c23d repeated it for qtest_add_abrt_handler().  The screwy
parameter gets assigned to GHook member func, so change its type to
match.  Requires wrapping kill_qemu() to keep the type checker happy.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[AF/armbru: Inline GTestFunc/GTestDataFunc typedef for old GLib]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
5 years agoMerge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-12-04' into...
Peter Maydell [Fri, 4 Dec 2015 10:55:03 +0000 (10:55 +0000)]
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-12-04' into staging

trivial patches for 2015-12-04

# gpg: Signature made Fri 04 Dec 2015 06:40:23 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-12-04:
  bt: check struct sizes
  typedefs: Put them back into alphabetical order
  scsi: remove scsi_req_free prototype
  gt64xxx: fix decoding of ISD register
  configure: use appropriate code fragment for -fstack-protector checks
  crypto: avoid two coverity false positive error reports
  configure: Diagnose broken linkers directly
  bt: avoid unintended sign extension
  util/id: fully allocate names table

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoMerge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.5-20151204' into staging
Peter Maydell [Fri, 4 Dec 2015 09:49:28 +0000 (09:49 +0000)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.5-20151204' into staging

ppc patch queue for 2.5 2015-12-04

This contains some last minute QOM behaviour fixes from Markus
Armbruster.

# gpg: Signature made Fri 04 Dec 2015 06:43:54 GMT using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.5-20151204:
  spapr_drc: Change value of property "fdt" from null back to {}
  spapr_drc: Make device "spapr-dr-connector" unavailable with -device
  spapr_drc: Handle visitor errors properly

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agobt: check struct sizes
Paolo Bonzini [Mon, 30 Nov 2015 09:57:25 +0000 (10:57 +0100)]
bt: check struct sizes

See http://permalink.gmane.org/gmane.linux.bluez.kernel/36505.  For historical
reasons these do not use sizeof, and Coverity caught a mistake in
EVT_ENCRYPT_CHANGE_SIZE.

In addition:

- remove status from create_conn_cancel_cp; the "status" field is only
in rp structs.  Note that this means that the OCF_CREATE_CONN_CANCEL
could never have worked (it would have failed the LENGTH_CHECK), but
I am keeping it anyway.

- OCF_READ_LINK_QUALITY similarly could never have worked, but I am
fixing read_link_quality_cp anyway.

- fix inquiry_info which is shorter by one: the kernel has a struct that
is 14 byte long, but not counting the initial num_responses byte which
the kernel parses separately;

- remove extended_inquiry_info altogether, since it's not used and unlike
the other inquiry structs does not have the initial num_responses byte.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
5 years agotypedefs: Put them back into alphabetical order
Markus Armbruster [Thu, 19 Nov 2015 12:29:28 +0000 (13:29 +0100)]
typedefs: Put them back into alphabetical order

"Please keep this list in alphabetical order" has been more honoured
in the breach than in the observance.  Clean up.

While there, drop a redundant struct declaration.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
5 years agoscsi: remove scsi_req_free prototype
Hervé Poussineau [Thu, 12 Nov 2015 21:26:33 +0000 (22:26 +0100)]
scsi: remove scsi_req_free prototype

Function has been deleted in ad2d30f79d3b0812f02c741be2189796b788d6d7.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
5 years agogt64xxx: fix decoding of ISD register
Paolo Bonzini [Fri, 6 Nov 2015 15:34:06 +0000 (16:34 +0100)]
gt64xxx: fix decoding of ISD register

The GT64xxx's internal registers can be placed above the first 4 GiB
in the address space, but not above the first 64 GiB.  Correctly cast
the register to a 64-bit integer, and mask away bits above bit 35.

Datasheet at http://pdf.datasheetarchive.com/datasheetsmain/Datasheets-33/DSA-655889.pdf
(bug reported by Coverity).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
5 years agoconfigure: use appropriate code fragment for -fstack-protector checks
Rodrigo Rebello [Thu, 12 Nov 2015 14:04:28 +0000 (12:04 -0200)]
configure: use appropriate code fragment for -fstack-protector checks

The check for stack-protector support consisted in compiling and linking
the test program below (output by function write_c_skeleton()) with the
compiler flag -fstack-protector-strong first and then with
-fstack-protector-all if the first one failed to work:

  int main(void) { return 0; }

This caused false positives when using certain toolchains in which the
compiler accepted -fstack-protector-strong but no support was provided
by the C library, since for this stack-protector variant the compiler
emits canary code only for functions that meet specific conditions
(local arrays, memory references to local variables, etc.) and the code
fragment under test included none of them (hence no stack protection
code generated, no link failure).

This fix changes the test program used for -fstack-protector checks to
include a function that meets conditions which cause the compiler to
generate canary code in all variants.

Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
5 years agocrypto: avoid two coverity false positive error reports
Daniel P. Berrange [Fri, 13 Nov 2015 17:45:27 +0000 (17:45 +0000)]
crypto: avoid two coverity false positive error reports

In qcrypto_tls_creds_get_path() coverity complains that
we are checking '*creds' for NULL, despite having
dereferenced it previously. This is harmless bug due
to fact that the trace call was too early. Moving it
after the cleanup gets the desired semantics.

In qcrypto_tls_creds_check_cert_key_purpose() coverity
complains that we're passing a pointer to a previously
free'd buffer into gnutls_x509_crt_get_key_purpose_oid()
This is harmless because we're passing a size == 0, so
gnutls won't access the buffer, but rather just report
what size it needs to be. We can avoid it though by
explicitly setting the buffer to NULL after free'ing
it.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
5 years agoconfigure: Diagnose broken linkers directly
Peter Maydell [Tue, 24 Nov 2015 14:55:46 +0000 (14:55 +0000)]
configure: Diagnose broken linkers directly

Currently if the user's compiler works for creating .o files but
their linker is broken such that compiling an executable from a
C file does not work, we will report a misleading error message
about the compiler not supporting __thread (since that happens
to be the first test we run which requires a working linker).
Explicitly check that compile_prog works as well as compile_object,
so that people whose toolchain setup is broken get a more helpful
error message.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
5 years agobt: avoid unintended sign extension
Paolo Bonzini [Fri, 27 Nov 2015 12:08:25 +0000 (13:08 +0100)]
bt: avoid unintended sign extension

In the case of a 4-byte length, shifting a value by 24 may cause
an unintended sign extension when converting from int to size_t.
Use a uint32_t variable instead.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
5 years agoutil/id: fully allocate names table
John Snow [Wed, 25 Nov 2015 21:03:37 +0000 (16:03 -0500)]
util/id: fully allocate names table

Trivial: this array should be allocated to have ID_MAX entries always.
Otherwise if someone were to forget to expand this table, the assertion
in the id generator won't actually trigger; it will read junk data.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
5 years agospapr_drc: Change value of property "fdt" from null back to {}
Markus Armbruster [Thu, 3 Dec 2015 16:37:39 +0000 (17:37 +0100)]
spapr_drc: Change value of property "fdt" from null back to {}

prop_get_fdt() misuses the visitor API: when fdt is null, it doesn't
visit anything.  object_property_get_qobject() happily
object_property_get_qobject().  Amazingly, the latter survives the
misuse.  Turns out we've papered over it long before prop_get_fdt()
existed, in commit 1d10b44.

However, commit 6c2f9a1 changed how we paper over it, and as a side
effect changed qom-get's value from {} to null.  Change it right back
by fixing the visitor misuse.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
5 years agospapr_drc: Make device "spapr-dr-connector" unavailable with -device
Markus Armbruster [Thu, 3 Dec 2015 16:37:40 +0000 (17:37 +0100)]
spapr_drc: Make device "spapr-dr-connector" unavailable with -device

It should only be created via spapr_dr_connector_new().  Attempting to
create it with -device crashes.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
5 years agospapr_drc: Handle visitor errors properly
Markus Armbruster [Thu, 3 Dec 2015 16:37:38 +0000 (17:37 +0100)]
spapr_drc: Handle visitor errors properly

Since prop_get_fdt() is only used with QmpOutputVisitor, errors
shouldn't actually happen, so this is only a latent bug.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
5 years agoqom: Update documentation comment of struct Object
Cao jin [Thu, 5 Nov 2015 07:39:03 +0000 (15:39 +0800)]
qom: Update documentation comment of struct Object

It doesn't have "GSList *interfaces" anymore, drop the paragraph.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
5 years agotests: Fix check-report-qtest-% target
Andreas Färber [Sat, 21 Nov 2015 01:20:06 +0000 (02:20 +0100)]
tests: Fix check-report-qtest-% target

Commit e253c28 ("tests: Fix how qom-test is run") introduced
$(qtest-generic-y) and used it for check-qtest-% target, but did not
update check-report-qtest-%. This causes check-report-qtest-aarch64.xml
target to fail with a gtester usage error for lack of test arguments.

Fix this by adding $(qtest-generic-y) in check-report-qtest-%.
Also add it in check-clean target, spotted by Markus.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
5 years agoui: vnc: avoid floating point exception
Prasad J Pandit [Thu, 3 Dec 2015 13:24:17 +0000 (18:54 +0530)]
ui: vnc: avoid floating point exception

While sending 'SetPixelFormat' messages to a VNC server,
the client could set the 'red-max', 'green-max' and 'blue-max'
values to be zero. This leads to a floating point exception in
write_png_palette while doing frame buffer updates.

Reported-by: Lian Yihan <lianyihan@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoMerge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Peter Maydell [Thu, 3 Dec 2015 11:08:43 +0000 (11:08 +0000)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

# gpg: Signature made Thu 03 Dec 2015 04:59:48 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request:
  iotests: Add regresion test case for write notifier assertion failure
  iotests: Add "add_drive_raw" method
  block: Don't wait serialising for non-COR read requests
  iothread: include id in thread name

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoMerge remote-tracking branch 'remotes/juanquintela/tags/migration/20151203' into...
Peter Maydell [Thu, 3 Dec 2015 10:43:43 +0000 (10:43 +0000)]
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20151203' into staging

migration/next for 20151203

# gpg: Signature made Wed 02 Dec 2015 23:19:10 GMT using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"

* remotes/juanquintela/tags/migration/20151203:
  migration: do floating-point division
  migration: Clean up use of g_poll() in socket_writev_buffer()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoiotests: Add regresion test case for write notifier assertion failure
Fam Zheng [Tue, 1 Dec 2015 09:36:30 +0000 (17:36 +0800)]
iotests: Add regresion test case for write notifier assertion failure

The idea is to let the top level bs have a big request alignment with
blkdebug, so that the aio_write request issued from monitor will be
serialised. This tests that QEMU doesn't crash upon the read request
from the backup job's write notifier, which is a very special case of
"reentrant" request.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
5 years agoiotests: Add "add_drive_raw" method
Fam Zheng [Tue, 1 Dec 2015 09:36:29 +0000 (17:36 +0800)]
iotests: Add "add_drive_raw" method

This offers full manual control over the "-drive" options.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
5 years agoblock: Don't wait serialising for non-COR read requests
Fam Zheng [Tue, 1 Dec 2015 09:36:28 +0000 (17:36 +0800)]
block: Don't wait serialising for non-COR read requests

The assertion problem was noticed in 06c3916b35a, but it wasn't
completely fixed, because even though the req is not marked as
serialising, it still gets serialised by wait_serialising_requests
against other serialising requests, which could lead to the same
assertion failure.

Fix it by even more explicitly skipping the serialising for this
specific case.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
5 years agoiothread: include id in thread name
Paolo Bonzini [Tue, 24 Nov 2015 13:46:44 +0000 (14:46 +0100)]
iothread: include id in thread name

This makes it easier to find the desired thread.  Use "IO" plus the id;
even with the 14 character limit on the thread name, enough of the id should
be readable (e.g. "IO iothreadNNN" with three characters for the number).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1448372804-5034-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
5 years agoMerge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
Peter Maydell [Wed, 2 Dec 2015 23:11:24 +0000 (23:11 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,vhost,mmap fixes for 2.5

vhost test patches to fix the travis build
virtio ccw patch to fix virtio 1
virtio pci patch to fix pci express
vhost user bridge patch to fix fd leaks
mmap-alloc patch to fix hugetlbfs on ppc64
remove dead code for vhost (trivial)

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 02 Dec 2015 20:38:41 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  util/mmap-alloc: fix hugetlb support on ppc64
  virtio-pci: Set the QEMU_PCI_CAP_EXPRESS capability early in its DeviceClass realize method
  virtio: handle non-virtio-1-capable backend for ccw
  tests/vhost-user-bridge.c: fix fd leakage
  vhost: drop dead code
  vhost-user: verify that number of queues is non-zero
  vhost-user-test: fix crash with glib < 2.36
  vhost-user-test: use unix port for migration
  vhost-user-test: fix chardriver race

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agomigration: do floating-point division
Paolo Bonzini [Mon, 26 Jan 2015 11:12:27 +0000 (12:12 +0100)]
migration: do floating-point division

Dividing integer expressions transferred_bytes and time_spent, and then converting
the integer quotient to type double. Any remainder, or fractional part of the
quotient, is ignored.  Fix this.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
5 years agomigration: Clean up use of g_poll() in socket_writev_buffer()
Markus Armbruster [Tue, 1 Dec 2015 13:34:14 +0000 (14:34 +0100)]
migration: Clean up use of g_poll() in socket_writev_buffer()

socket_writev_buffer() writes in a loop, using g_poll() to block.  If
g_poll() fails, it tries to write more before the file descriptor is
ready.  In theory, this could go into a tight loop.  In practice,
errors other than EINTR are really unlikely, and when they happen,
we're probably screwed anyway, so we can just as well loop.

Clean it up a bit: retry poll on EINTR, keep ignoring other errors.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
5 years agoutil/mmap-alloc: fix hugetlb support on ppc64
Michael S. Tsirkin [Wed, 2 Dec 2015 19:14:12 +0000 (21:14 +0200)]
util/mmap-alloc: fix hugetlb support on ppc64

Since commit 8561c9244ddf1122d "exec: allocate PROT_NONE pages on top of
RAM", it is no longer possible to back guest RAM with hugepages on ppc64
hosts:

mmap(NULL, 285212672, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0x3fff57000000
mmap(0x3fff57000000, 268435456, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED, 19, 0) = -1 EBUSY (Device or resource busy)

This is because on ppc64, Linux fixes a page size for a virtual address
at mmap time, so we can't switch a range of memory from anonymous
small pages to hugetlbs with MAP_FIXED.

See commit d0f13e3c20b6fb73ccb467bdca97fa7cf5a574cd
("[POWERPC] Introduce address space "slices"") in Linux
history for the details.

Detect this and create the PROT_NONE mapping using the same fd.

Naturally, this makes the guard page bigger with hugetlbfs.

Based on patch by Greg Kurz.

Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agovirtio-pci: Set the QEMU_PCI_CAP_EXPRESS capability early in its DeviceClass realize...
Shmulik Ladkani [Wed, 2 Dec 2015 17:49:07 +0000 (19:49 +0200)]
virtio-pci: Set the QEMU_PCI_CAP_EXPRESS capability early in its DeviceClass realize method

In 1811e64 'hw/virtio: Add PCIe capability to virtio devices', the
QEMU_PCI_CAP_EXPRESS capability was added to virtio's pci_dev, within
'virtio_pci_realize' - the pci device object realization method.

This occurs to late, as 'pci_qdev_realize' (DeviceClass.realize of
TYPE_PCI_DEVICE) has already been called, without knowing that the
device instance is indeed an "express" instance, thus allocating
insufficient pci config space.

As a result, device may crash upon attempt to write to the PCIE config
space.

Fix, by arming the QEMU_PCI_CAP_EXPRESS capability early in virtio-pci's
own DeviceClass realize method.

This also makes code cleaner, as 'virtio_pci_realize' may now access the
'pci_is_express' predicate when needed.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
5 years agovirtio: handle non-virtio-1-capable backend for ccw
Cornelia Huck [Wed, 2 Dec 2015 17:31:57 +0000 (18:31 +0100)]
virtio: handle non-virtio-1-capable backend for ccw

If you run a qemu advertising VERSION_1 with an old kernel where
vhost did not yet support VERSION_1, you'll end up with a device
that is {modern pci|ccw revision 1} but does not advertise VERSION_1.
This is not a sensible configuration and is rejected by the Linux
guest drivers.

To fix this, add a ->post_plugged() callback invoked after features
have been queried that can handle the VERSION_1 bit being withdrawn
and change ccw to fall back to revision 0 if VERSION_1 is gone.

Note that pci is _not_ fixed; we'll need to rethink the approach
for the next release but at least for pci it's not a regression.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agotests/vhost-user-bridge.c: fix fd leakage
Victor Kaplansky [Tue, 1 Dec 2015 16:57:39 +0000 (18:57 +0200)]
tests/vhost-user-bridge.c: fix fd leakage

This fixes file descriptor leakage in vhost-user-bridge
application. Whenever a new callfd or kickfd is set, the previous
one should be explicitly closed. File descriptors used to map
guest's memory are closed immediately after mmap call.

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agoMerge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Peter Maydell [Wed, 2 Dec 2015 17:05:34 +0000 (17:05 +0000)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

# gpg: Signature made Wed 02 Dec 2015 15:57:35 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream:
  blkdebug: silence warning under qtest
  qcow2: Fix potential qemu-img check crash on 32 bit hosts

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoMerge remote-tracking branch 'remotes/cody/tags/block-pull-request' into staging
Peter Maydell [Wed, 2 Dec 2015 16:24:26 +0000 (16:24 +0000)]
Merge remote-tracking branch 'remotes/cody/tags/block-pull-request' into staging

# gpg: Signature made Wed 02 Dec 2015 15:45:36 GMT using RSA key ID C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg:                 aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg:                 aka "Jeffrey Cody <codyprime@gmail.com>"

* remotes/cody/tags/block-pull-request:
  mirror: Quiesce source during "mirror_exit"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agovhost: drop dead code
Michael S. Tsirkin [Wed, 2 Dec 2015 11:50:00 +0000 (13:50 +0200)]
vhost: drop dead code

commit 1e7398a1 ("vhost: enable vhost without without MSI-X"_
dropped the implementation of vhost_dev_query,
drop it from the header file as well.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
5 years agomirror: Quiesce source during "mirror_exit"
Fam Zheng [Mon, 23 Nov 2015 02:28:04 +0000 (10:28 +0800)]
mirror: Quiesce source during "mirror_exit"

With dataplane, the ioeventfd events could be dispatched after
mirror_run releases the dirty bitmap, but before mirror_exit actually
does the device switch, because the iothread will still be running, and
it will cause silent data loss.

Fix this by adding a bdrv_drained_begin/end pair around the window, so
that no new external request will be handled.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
5 years agoMerge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Peter Maydell [Wed, 2 Dec 2015 15:41:38 +0000 (15:41 +0000)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* exec.c use after free
* Xen 32-on-64 breakage
* missing EINTR
* naughty warning under qtest

# gpg: Signature made Wed 02 Dec 2015 12:13:55 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream:
  translate-all: ensure host page mask is always extended with 1's
  main-loop: suppress warnings under qtest
  qemu-char: retry g_poll on EINTR
  exec: Stop using memory after free

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoMerge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2015-12-02' into queue...
Kevin Wolf [Wed, 2 Dec 2015 15:38:03 +0000 (16:38 +0100)]
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2015-12-02' into queue-block

One block patch for qemu 2.5-rc3.

# gpg: Signature made Wed Dec  2 16:29:17 2015 CET using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"

* mreitz/tags/pull-block-for-kevin-2015-12-02:
  blkdebug: silence warning under qtest

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
5 years agoblkdebug: silence warning under qtest
Michael S. Tsirkin [Mon, 30 Nov 2015 11:44:44 +0000 (13:44 +0200)]
blkdebug: silence warning under qtest

make check always outputs warnings, this
is not nice.  Disable blkdebug warnings under qtest.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1448883874-17933-1-git-send-email-mst@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
5 years agovhost-user: verify that number of queues is non-zero
Victor Kaplansky [Tue, 1 Dec 2015 13:32:26 +0000 (15:32 +0200)]
vhost-user: verify that number of queues is non-zero

Fix QEMU crash when -netdev type=vhost-user,queues=n is passed
with zero number of queues.

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
5 years agovhost-user-test: fix crash with glib < 2.36
Marc-André Lureau [Mon, 30 Nov 2015 16:44:49 +0000 (17:44 +0100)]
vhost-user-test: fix crash with glib < 2.36

The prepare callback needs to be implemented with glib < 2.36,
quoting glib documentation:
"Since 2.36 this may be NULL, in which case the effect is as if the
function always returns FALSE with a timeout of -1."

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agovhost-user-test: use unix port for migration
Marc-André Lureau [Fri, 27 Nov 2015 14:41:19 +0000 (15:41 +0100)]
vhost-user-test: use unix port for migration

TCP port 1234 may be used by another process concurrently. Instead use a
temporary unix socket.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agovhost-user-test: fix chardriver race
Marc-André Lureau [Fri, 27 Nov 2015 14:41:18 +0000 (15:41 +0100)]
vhost-user-test: fix chardriver race

vhost-user-tests uses a helper thread to dispatch the vhost-user servers
sources. However the CharDriverState is not thread-safe. Therefore, when
it's given to the thread, it shouldn't be manipulated concurrently.

We dispatch cleaning the server in an idle source. By the end of the
test, we ensure not to leave anything behind by joining the thread and
finishing the sources dispatch.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5 years agoqcow2: Fix potential qemu-img check crash on 32 bit hosts
Kevin Wolf [Tue, 1 Dec 2015 14:16:49 +0000 (15:16 +0100)]
qcow2: Fix potential qemu-img check crash on 32 bit hosts

This crash was caught with qemu-iotests test case 138.

Commit b6d36de already fixed a few 32 bit truncation bugs that could
cause qemu-img check to allocate too little memory and consequently
it would segfault. On 32 bit hosts, there is one more place that needs
to be fixed because size_t was involved in the calculation and is a
32 bit type there.

Cc: qemu-stable@nongnu.org
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
5 years agotranslate-all: ensure host page mask is always extended with 1's
Paolo Bonzini [Wed, 2 Dec 2015 12:00:54 +0000 (13:00 +0100)]
translate-all: ensure host page mask is always extended with 1's

Anthony reported that >4GB guests on Xen with 32bit QEMU broke after
commit 4ed023c ("Round up RAMBlock sizes to host page sizes", 2015-11-05).

In that patch sizes are masked against qemu_host_page_size/mask which
are uintptr_t, and thus 32bit on a 32bit QEMU, even though the ram space
might be bigger than 4GB on Xen.

Since ram_addr_t is not available on user-mode emulation targets, ensure
that we get a sign extension when masking away the low bits of the address.
Remove the ~10 year old scary comment that the type of these variables
is probably wrong, with another equally scary comment.  The new comment
however does not have "???" in it, which is arguably an improvement.

For completeness use the alignment macros in linux-user and bsd-user
instead of manually doing an &.  linux-user and bsd-user are not affected
by the Xen issue, however.

Reviewed-by: Juan Quintela <quintela@redhat.com>
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes: 4ed023ce2a39ab5812d33cf4d819def168965a7f
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agomain-loop: suppress warnings under qtest
Michael S. Tsirkin [Mon, 30 Nov 2015 11:30:04 +0000 (13:30 +0200)]
main-loop: suppress warnings under qtest

commit 01c22f2cdd4fcf02276ea10f48253850a5fd7259 ("main-loop: Suppress
"I/O thread spun" warnings for qtest") doesn't actually disable the
warning for everyone since some tests don't run under the qtest
accelerator.

Check qtest_driver instead.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <1448882964-22433-1-git-send-email-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoqemu-char: retry g_poll on EINTR
Paolo Bonzini [Tue, 1 Dec 2015 10:27:00 +0000 (11:27 +0100)]
qemu-char: retry g_poll on EINTR

This is a case where pty_chr_update_read_handler_locked's lack
of error checking can produce incorrect values.  We are not using
SIGUSR1 anymore, so this is quite theoretical, but easy to fix.

Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoexec: Stop using memory after free
Don Slutz [Mon, 30 Nov 2015 22:11:04 +0000 (17:11 -0500)]
exec: Stop using memory after free

memory_region_unref(mr) can free memory.

For example I got:

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f43280d4700 (LWP 4462)]
0x00007f43323283c0 in phys_section_destroy (mr=0x7f43259468b0)
    at /home/don/xen/tools/qemu-xen-dir/exec.c:1023
1023        if (mr->subpage) {
(gdb) bt
    at /home/don/xen/tools/qemu-xen-dir/exec.c:1023
    at /home/don/xen/tools/qemu-xen-dir/exec.c:1034
    at /home/don/xen/tools/qemu-xen-dir/exec.c:2205
(gdb) p mr
$1 = (MemoryRegion *) 0x7f43259468b0

And this change prevents this.

Signed-off-by: Don Slutz <Don.Slutz@Gmail.com>
Message-Id: <1448921464-21845-1-git-send-email-Don.Slutz@Gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoMerge remote-tracking branch 'remotes/rth/tags/pull-tcg-20151201' into staging
Peter Maydell [Wed, 2 Dec 2015 10:16:53 +0000 (10:16 +0000)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20151201' into staging

Last minute fix

# gpg: Signature made Tue 01 Dec 2015 22:37:25 GMT using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tcg-20151201:
  tcg: Increase the highwater reservation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agotcg: Increase the highwater reservation
Richard Henderson [Tue, 1 Dec 2015 16:10:28 +0000 (08:10 -0800)]
tcg: Increase the highwater reservation

If there are a lot of guest memory ops in the TB, the amount of
code generated by tcg_out_tb_finalize could be well more than 1k.
In the short term, increase the reservation larger than any TB
seen in practice.

Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
5 years agoui/cocoa.m: Prevent activation clicks from going to guest
Peter Maydell [Thu, 26 Nov 2015 15:19:28 +0000 (15:19 +0000)]
ui/cocoa.m: Prevent activation clicks from going to guest

When QEMU is brought to the foreground, the click event that activates QEMU
should not go to the guest. Accidents happen when they do go to the guest
without giving the user a chance to handle them. In particular, if the
guest input device is not an absolute-position one then the location of
the guest cursor (and thus the click) will likely not be the location of
the host cursor when it is clicked, and could be completely obscured
below another window. Don't send mouse clicks to QEMU unless the
window either has focus or has grabbed mouse events.

Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 1448551168-13196-1-git-send-email-peter.maydell@linaro.org

5 years agoMerge remote-tracking branch 'remotes/cohuck/tags/s390x-20151201' into staging
Peter Maydell [Tue, 1 Dec 2015 16:30:27 +0000 (16:30 +0000)]
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20151201' into staging

Last round of s390x fixes for 2.5:
- The bios should be built for the first z machine, so that newer
  instructions don't creep in.
- Silence annoying message when running make check.
- Fix a problem with the pci iommu exposed by recent changes.

# gpg: Signature made Tue 01 Dec 2015 08:59:42 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"

* remotes/cohuck/tags/s390x-20151201:
  s390x/pci: fix up IOMMU size
  s390x: no deprecation warning while testing
  pc-bios/s390-ccw: rebuild image
  pc-bios/s390-ccw: build for z900

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agos390x/pci: fix up IOMMU size
Yi Min Zhao [Wed, 4 Nov 2015 07:50:45 +0000 (15:50 +0800)]
s390x/pci: fix up IOMMU size

Present code uses @size==UINT64_MAX to initialize IOMMU. It infers that it
can map any 64-bit IOVA whatsoever. But in fact, the largest DMA range for
each PCI Device on s390x is from ZPCI_SDMA_ADDR to ZPCI_EDMA_ADDR. The largest
value is returned from hardware, which is to indicate the largest range
hardware can support. But the real IOMMU size for specific PCI Device is
obtained once qemu intercepts mpcifc instruction that guest is requesting a
DMA range for that PCI Device. Therefore, before intercepting mpcifc instruction,
qemu cannot be aware of the size of IOMMU region that guest will use.

Moreover, iommu replay during device initialization for the whole region in
4k steps takes a very long time.

In conclusion, this patch intializes IOMMU region for each PCI Device when
intercept mpcifc instruction which is to register DMA range for the PCI Device.
And then, destroy IOMMU region when guest wants to deregister IOAT.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
5 years agos390x: no deprecation warning while testing
Cornelia Huck [Thu, 12 Nov 2015 15:46:09 +0000 (16:46 +0100)]
s390x: no deprecation warning while testing

'make check' tries to start all available machines; the deprecation
message for the s390-virtio machine is both useless and annoying
there. Silence it while testing.

Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
5 years agopc-bios/s390-ccw: rebuild image
Cornelia Huck [Thu, 26 Nov 2015 14:48:30 +0000 (15:48 +0100)]
pc-bios/s390-ccw: rebuild image

Contains:
- pc-bios/s390-ccw: build for z900

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
5 years agopc-bios/s390-ccw: build for z900
Christian Borntraeger [Tue, 13 Oct 2015 13:10:46 +0000 (15:10 +0200)]
pc-bios/s390-ccw: build for z900

Newer distributions have an architecture level set to z9, z196
or similar - also as default option for the compiler.

We should build the bios for z900 to allow it to run with
all 64bit CPUs. This will become more important as soon as
QEMU/KVM does support CPU models.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
5 years agoMerge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
Peter Maydell [Mon, 30 Nov 2015 21:59:22 +0000 (21:59 +0000)]
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging

Two fixes for virtfs/9p from Paolo.

# gpg: Signature made Mon 30 Nov 2015 14:10:47 GMT using DSA key ID 0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg:                 aka "Greg Kurz <groug@free.fr>"
# gpg:                 aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg:                 aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg:                 aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg:                 aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894  DBA2 02FC 3AEB 0101 DBC2

* remotes/gkurz/tags/for-upstream:
  virtio-9p: use QEMU thread pool
  fsdev-proxy-helper: avoid TOC/TOU race

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoMerge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.5-20151130' into staging
Peter Maydell [Mon, 30 Nov 2015 17:09:35 +0000 (17:09 +0000)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.5-20151130' into staging

ppc patch queue for qemu-2.5 20151130

target-ppc and related bugfix patches for qemu-2.5

I don't have the facilities to test the Macintosh and BookE related
patches.  I've sanity checked them (inspection + make check), but I'm
otherwise relying on the submitters.

# gpg: Signature made Mon 30 Nov 2015 08:42:01 GMT using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.5-20151130:
  target-ppc/fpu_helper: fix FPSCR_FX bit shift operation
  target-ppc: Move the FPSCR bit update macros to cpu.h
  hw/ppc/ppc405_boards: Fix infinite recursion by converting taihu_cpld from old_mmio
  hw/ppc/spapr: Remove duplicated "pseries" alias
  mac_dbdma: always initialize channel field in DBDMA_channel

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agoMerge remote-tracking branch 'remotes/weil/tags/pull-wxx-20151130' into staging
Peter Maydell [Mon, 30 Nov 2015 15:35:20 +0000 (15:35 +0000)]
Merge remote-tracking branch 'remotes/weil/tags/pull-wxx-20151130' into staging

wxx patch queue

# gpg: Signature made Mon 30 Nov 2015 05:48:33 GMT using RSA key ID 677450AD
# gpg: Good signature from "Stefan Weil <sw@weilnetz.de>"
# gpg:                 aka "Stefan Weil <stefan.weil@weilnetz.de>"
# gpg:                 aka "Stefan Weil <stefan.weil@bib.uni-mannheim.de>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 4923 6FEA 75C9 5D69 8EC2  B78A E08C 21D5 6774 50AD

* remotes/weil/tags/pull-wxx-20151130:
  w32: Use gcc option -mthreads
  oslib-win32: Change return type of function getpagesize
  trace/simple: Fix warning and wrong trace file name for MinGW

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
5 years agovirtio-9p: use QEMU thread pool
Paolo Bonzini [Fri, 27 Nov 2015 11:43:06 +0000 (12:43 +0100)]
virtio-9p: use QEMU thread pool

The QEMU thread pool already has a mechanism to invoke callbacks in the main
thread.  It does not need an EventNotifier and it is more efficient too.
Use it instead of GAsyncQueue + GThreadPool + glue.

As a side effect, it silences Coverity's complaint about an unchecked
return value for event_notifier_init.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
(removed no more needed #include <glib.h> from virtio-9p-coth.h)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
5 years agofsdev-proxy-helper: avoid TOC/TOU race
Paolo Bonzini [Fri, 27 Nov 2015 11:43:05 +0000 (12:43 +0100)]
fsdev-proxy-helper: avoid TOC/TOU race

There is a minor time of check/time of use race between statfs and chroot.
It can be fixed easily by stat-ing the root after it has been changed.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
5 years agotarget-ppc/fpu_helper: fix FPSCR_FX bit shift operation
Madhavan Srinivasan [Fri, 20 Nov 2015 11:31:48 +0000 (17:01 +0530)]
target-ppc/fpu_helper: fix FPSCR_FX bit shift operation

Currently in TCG mode, updating floating exception
summary bit (FPSCR_FX) in fpscr also updates
the upper 32bits of fpscr with all 1s.
Modify the bit shift operation statement to use
1ULL instead.

Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
5 years agotarget-ppc: Move the FPSCR bit update macros to cpu.h
Madhavan Srinivasan [Fri, 20 Nov 2015 11:31:47 +0000 (17:01 +0530)]
target-ppc: Move the FPSCR bit update macros to cpu.h

Move the FPSCR bit update macros defined in dfp_helper
to cpu.h. This way, fpu_helper functions can also use them

Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
5 years agohw/ppc/ppc405_boards: Fix infinite recursion by converting taihu_cpld from old_mmio
Peter Maydell [Mon, 16 Nov 2015 14:57:50 +0000 (14:57 +0000)]
hw/ppc/ppc405_boards: Fix infinite recursion by converting taihu_cpld from old_mmio

The taihu_cpld_writel() function had an obvious typo that meant that
if it was ever called it would go into an infinite recursion. Newer
versions of clang will detect and warn about this:
  hw/ppc/ppc405_boards.c:481:1: warning: all paths through this function will call itself [-Winfinite-recursion]

Fix this by converting taihu_cpld from the legacy old_mmio accessors
to new-style ones, with an impl {} declaration to cause the core
memory code to do the splitting of 16 bit and 32 bit accesses into
multiple 8-bit accesses.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
5 years agohw/ppc/spapr: Remove duplicated "pseries" alias
Thomas Huth [Mon, 23 Nov 2015 16:13:37 +0000 (17:13 +0100)]
hw/ppc/spapr: Remove duplicated "pseries" alias

The "pseries" alias is currently set twice, one time for the
pseries-2.4 machine and one time for the "pseries-2.5" machine.
To avoid confusion with the alias, let's remove the one from
the older machine class. And while we're at it, also remove
the "is_default = 0" there since the is_default variable
should be set to zero by default already.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
5 years agomac_dbdma: always initialize channel field in DBDMA_channel
Hervé Poussineau [Thu, 12 Nov 2015 21:24:08 +0000 (22:24 +0100)]
mac_dbdma: always initialize channel field in DBDMA_channel

dbdma_from_ch() uses channel field to return the right DBDMA object.
Previous code was working if guest OS was only using registered DMA channels.
However, it lead to QEMU crashes if guest OS was using unregistered DMA channels.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
5 years agow32: Use gcc option -mthreads
Stefan Weil [Thu, 26 Nov 2015 11:13:12 +0000 (12:13 +0100)]
w32: Use gcc option -mthreads

QEMU uses threads / coroutines, therefore support for thread local storage
and thread safe libraries (-D_MT) must be enabled by using -mthreads.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
5 years agooslib-win32: Change return type of function getpagesize
Stefan Weil [Sat, 14 Nov 2015 19:25:44 +0000 (20:25 +0100)]
oslib-win32: Change return type of function getpagesize

getpagesize on Linux returns an int. Fix QEMU's implementation for
Windows to return an int (instead of size_t), too.

This fixes a compiler warning which was introduced recently
(commit 093e3c42).

Signed-off-by: Stefan Weil <sw@weilnetz.de>
5 years agotrace/simple: Fix warning and wrong trace file name for MinGW
Stefan Weil [Wed, 11 Mar 2015 21:08:56 +0000 (22:08 +0100)]
trace/simple: Fix warning and wrong trace file name for MinGW

On Windows, getpid() always returns an int value, but pid_t (which is
expected by the format string) is either a 32 bit or a 64 bit value.

Without a type cast (or a modified format string), the compiler prints
a warning when building for 64 bit Windows and the resulting trace_file_name
will include a wrong pid:

trace/simple.c:332:9: warning:
 format ‘%lld’ expects argument of type ‘long long int’,
 but argument 2 has type ‘int’ [-Wformat=]

Signed-off-by: Stefan Weil <sw@weilnetz.de>
6 years agoMerge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
Peter Maydell [Fri, 27 Nov 2015 10:44:42 +0000 (10:44 +0000)]
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Fri 27 Nov 2015 02:42:02 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  tap-win32: disable broken async write path
  tap-win32: skip unexpected nodes during registry enumeration
  eepro100: Prevent two endless loops

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
6 years agotap-win32: disable broken async write path
Andrew Baumann [Wed, 18 Nov 2015 19:45:09 +0000 (11:45 -0800)]
tap-win32: disable broken async write path

The code under the TUN_ASYNCHRONOUS_WRITES path makes two incorrect
assumptions about the behaviour of the WriteFile API for overlapped
file handles. First, WriteFile does not update the
lpNumberOfBytesWritten parameter when the write completes
asynchronously (the number of bytes written is known only when the
operation completes). Second, the buffer shouldn't be touched (or
freed) until the operation completes. This led to at least one bug
where tap_win32_write returned zero bytes written, which in turn
caused further writes ("receives") to be disabled for that device.

This change disables the asynchronous write path, while keeping most
of the code around in case someone sees value in resurrecting it. It
also adds some conditional debug output, similar to the read path.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Acked-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
6 years agotap-win32: skip unexpected nodes during registry enumeration
Andrew Baumann [Wed, 18 Nov 2015 19:45:08 +0000 (11:45 -0800)]
tap-win32: skip unexpected nodes during registry enumeration

In order to find a named tap device, get_device_guid() enumerates children of
HKLM\SYSTEM\CCS\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}
(aka NETWORK_CONNECTIONS_KEY). For each child, it then looks for a
"Connection" subkey, but if this key doesn't exist, it aborts the
entire search. This was observed to fail on at least one Windows 10
machine, where there is an additional child of NETWORK_CONNECTIONS_KEY
(named "Descriptions"). Since registry enumeration doesn't guarantee
any particular sort order, we should continue to search for matching
children rather than aborting the search.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
6 years agoeepro100: Prevent two endless loops
Stefan Weil [Fri, 20 Nov 2015 07:42:33 +0000 (08:42 +0100)]
eepro100: Prevent two endless loops

http://lists.nongnu.org/archive/html/qemu-devel/2015-11/msg04592.html
shows an example how an endless loop in function action_command can
be achieved.

During my code review, I noticed a 2nd case which can result in an
endless loop.

Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
6 years agoUpdate version for v2.5.0-rc2 release v2.5.0-rc2
Peter Maydell [Thu, 26 Nov 2015 17:50:12 +0000 (17:50 +0000)]
Update version for v2.5.0-rc2 release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
6 years agoMerge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
Peter Maydell [Thu, 26 Nov 2015 16:50:59 +0000 (16:50 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost, pc: fixes for 2.5

Minor vhost fixes.  HW version tweak for PC.
Documentation and test updates.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 26 Nov 2015 16:40:25 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vhost-user-test: fix migration overlap test
  Fix memory leak on error
  Revert "vhost: send SET_VRING_ENABLE at start/stop"
  tests/vhost-user-bridge: read command line arguments
  tests/vhost-user-bridge: propose GUEST_ANNOUNCE feature
  vhost-user: clarify start and enable
  vhost-user: set link down when the char device is closed
  pc: Don't set hw_version on pc-*-2.5
  osdep: Change default value of qemu_hw_version() to "2.5+"

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
6 years agovhost-user-test: fix migration overlap test
Michael S. Tsirkin [Thu, 26 Nov 2015 13:14:02 +0000 (15:14 +0200)]
vhost-user-test: fix migration overlap test

During migration, source does GET_BASE, destination does SET_BASE.
Use that as opposed to fds being configured to detect
vhost user running on both source and destination.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
6 years agoMerge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-11-26' into staging
Peter Maydell [Thu, 26 Nov 2015 16:27:26 +0000 (16:27 +0000)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-11-26' into staging

QMP and QObject patches

# gpg: Signature made Thu 26 Nov 2015 09:07:18 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-monitor-2015-11-26:
  qjson: Limit number of tokens in addition to total size
  qjson: surprise, allocating 6 QObjects per token is expensive
  qjson: store tokens in a GQueue
  qjson: Convert to parser to recursive descent
  qjson: replace QString in JSONLexer with GString
  qjson: Inline token_is_escape() and simplify
  qjson: Inline token_is_keyword() and simplify
  qjson: Give each of the six structural chars its own token type
  qjson: Spell out some silent assumptions
  check-qjson: Add test for JSON nesting depth limit
  qjson: Don't crash when input exceeds nesting limit
  qjson: Apply nesting limit more sanely
  monitor: Plug memory leak on QMP error

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
6 years agoMerge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Peter Maydell [Thu, 26 Nov 2015 15:56:53 +0000 (15:56 +0000)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Small patches, without the one that introduces -fwrapv.

# gpg: Signature made Thu 26 Nov 2015 15:48:53 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream:
  target-i386: kvm: Print warning when clearing mcg_cap bits
  target-i386: kvm: Use env->mcg_cap when setting up MCE
  target-i386: kvm: Abort if MCE bank count is not supported by host
  virtio-scsi: don't crash without a valid device
  target-sparc: fix 32-bit truncation in fpackfix
  exec: remove warning about mempath and hugetlbfs
  Revert "exec: silence hugetlbfs warning under qtest"
  call bdrv_drain_all() even if the vm is stopped
  MAINTAINERS: Update TCG CPU cores section

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>